Product introduction
Horizontal sand mill, a high efficiency wet ultra-fine grinding equipment, which is widely used in coating, dye, paint, ink, medicine, photosensitive film, pesticide, paper and cosmetics and other non-metallic mineral industries. Ho
I. Product introduction
1. High efficiency, easy operation
2. Applicable viscosity:<30000cps
3. Applicable for big batch of solid and liquid double phase suspension
4. Imported assembled double end mechanical seal, its safety is higher than pin rod horizontal mill
5. Both pin rod and chamber use high wear resistant alloy, there is no wear, no rust and the chamber volume can be adjusted.
6. No color change or pollution for material milled
7. Cooling available for Shell, end face and shaft, good cooling effect, material temperature can be controlled within 45℃ (through 10℃ frozen water)
8. Screen sieve: adopt special high alloyed material, the gap of sieve can be adjusted as per the size of zirconia beads, simple and convenient; with a protection unit avoid beads blocked;
9. Milling beads size: 0.3-3mm, good wear resistance
10. Efficiency: 5 mircons (mill two times)
Can customize different material: PU, stainless steel, wear resistant alloy, full ceramic (zirconia)
II. Product specifications
Model | Power kW | Speed rmp | Capacity kg/h | Milling chamber volume L |
RMBS-0.5 | 2.2 | 2800 | 5-10 | 0.5 |
RMBS-5 | 11 | 1440 | 50-100 | 5 |
RMBS-20 | 30 | 900 | 150-400 | 20 |
RMBS-30 | 45 | 900 | 250-500 | 30 |
RMBS-50 | 75 | 850 | 300-600 | 50 |
RMBS-120 | 132 | 650 | 500-1000 | 120 |
Remarks:
1. Water is used as grinding medium for reference;
2. There are differences in special process requirements and use environment;
3. Please consult our engineers for specific process requirements;