图片展示
图片展示
Products

Cosmetics Complete Equipment

The homogeneous emulsifier is specially designed and manufactured by Rumi company for the production of cream, honey, emulsion emulsion and other emulsifying products in pharmaceutical industry and daily chemical industry. The machine features beautiful s

Product details

Introduction:  

   

The homogeneous emulsifying unit is specially designed and manufactured by Rumi company for the production of cream, honey, emulsion emulsion and other emulsifying products in pharmaceutical industry and daily chemical industry. The machine features beautiful shape, small volume, light weight, and all parts in contact with materials are made of high-quality stainless steel (note: 316L is used for medical use). All internal joints of the pot body adopt smooth circular arc transition, tilting discharging material and bottom discharging material ensure that there is no residual material in the pot; The structure of the stator and rotor is designed to be claw type dual occlusion. The material is inhaled from the upper part and lower part of the stator at the same time, the shear probability is doubled and the problem of dead Angle is avoided. Suitable for fine emulsification, high quality dispersion and high efficiency mixing. All - round wall scraping stirring material rolling without dead Angle, it is truly in line with GMP standards.


Generally consists of ten parts (which can be adjusted according to the actual situation) :

1. The main pot

Volume: 2l-2000l (customize).

Structure: three-layer structure, upper and lower dished head. The upper head is connected with the cylinder body by flange and is opened and closed by quick connection.

The inner jacket can be heated or cooled by oil. The outer jacket is with insulation cotton, the most outside of the insulation layer wrapped with stainless steel. The nozzles include one emulsifier shaft port, two sight glass port (one with light), one powder feeding port (with powder hopper), two liquid inlets, one vacuum suction port , one pressure gauge port, one sterile respirator port, one exhaust port, one spare port , one thermometer port (with thermometer), jacket with oil inlets and outlets, bottom of pot with discharge port (with valve),

Material: wet parts SUS316L , SUS304 jacket, and insulation layer material rock wool

Heating/cooling device: install electric heating rod in the jacket (or by mold temperature machine).

Attachment: with a manual tilting mechanism, convenient for tilting and discharging materials by hand.

Tank surface treatment: mirror finish on both internal and external surfaces.

2. Emulsifier for the main pot

Power rate: 0.75kw -110KW (Siemens motor)

Power source: 380V, 3P, 50HZ

Main shaft: SUS16L, fine grinding, dynamic and static balance test

Spindle speed: 0-3000rpm(variable frequency speed control, frequency converter)

Shaft bearing: NSK

Stator structure: bi-directional suction, claw structure, SUS316L forgings, wire cutting, all CNC machining center processing, rotating shaft through dynamic and static balance test, to ensure the accuracy.

Shaft seal: mechanical seal

3.Scraper type coaxial mixer

Power rate: 0.75kw -55KW (Siemens motor)

Power source: 380V, 3P, 50HZ

Main shaft: SUS316L , fine grinding, dynamic and static balance test

Agitator: coaxial frame agitator (with scraper and PTFE), and SUS316L

Rotor speed: 0-65rpm (variable frequency speed regulation, frequency converter)

Speed reducer: gear reducer

4. Water phase pot

Structure: upper flat cover, lower head, double structure. The upper cover is open, and the bottom of the pot is with discharging port and discharging valve. Electric heating rod is installed in the jacket, which is heated with water.

Material: the inner wall material SUS316L, outer wall material SUS304 .

5.Water phase pot mixer

Power: 0.37 KW to 5.5 KW

Agitator: paddle agitator

Stirring shaft: dynamic and static balance test. Bearing is NSK product

Transfer rate: 120 RPM

Material: the contact part SUS316L

6. Oil phase pot

Structure: upper flat cover, lower dished head, jacket type. The upper cover is open, and the bottom of the pot with discharging port and discharging valve. Electric heating rod is installed in the jacket, which is heated with water.

Material: the inner material is SUS316L, and the outer material is SUS304.

7.Oil phase pot mixer

Power: 0.37 KW to 5.5 KW

Agitator: paddle agitator

Stirring shaft: dynamic and static balance test. Bearing is NSK

Transfer rate: 120 RPM

Material: the contact part is SUS316L

8. Vacuum system

Water ring vacuum pump, vacuum buffer tank, vacuum pipeline, valve, etc

9.. Lifting system

Hydraulic lifting system, with engineering cylinder.

10. Electrical control system

Electrical control cabinet, Schneider electrical components.. With temperature control, alarm system. Emulsifier with frequency converter, frequency control.

Security Settings included

Optional PLC and touch screen operation.


Cosmetics Complete Equipment
The homogeneous emulsifier is specially designed and manufactured by Rumi company for the production of cream, honey, emulsion emulsion and other emulsifying products in pharmaceutical industry and daily chemical industry. The machine features beautiful s
长按识别二维码查看详情
长按图片保存/分享
Top
图片展示

Contact Us

 

Tel:(+86)21-80370855

Email:rumi001@rumichina.com

Address:Floor 3, Building 23a, Liando U Valley, Jinshi Road, Baoshan District, Shanghai, China

图片展示
Wechat App
图片展示
Wechat Official Account

Shanghai ICP 18048684    Copyright © 2018  Shanghai Rumi Mechanical &Electrical Technology Co.,Ltd All rights reserved

Hotline
+86(21)-80370855
二维码
二维码